Propellerhead Software, the Swedish company responsible for products such as Reason, ReCycle and ReBirth, announced that the. Reason Electromechanical ReFill 2.0 107 MB ElectroMechanical 2 ReFill is a collection of multisamples, patches and song files designed to bring the sound of those hard-to-find, easy-to-love vintage keyboards into your Reason rack.
- Print out one copy of each piece, and one additional copy of the 8-tooth partial gear.
- Mount 3 reed switches (http://www.sparkfun.com/products/10601) in reed_holder_leveler. These should be wired in-series (I basically clamped the holder piece between the 3 switches and a bit of proto-board).
- This design assumes you have a 1/8' piece of wood between the stepper motor and the reed_holder_leveler piece, and that the motor is attached at a 45 degree angle relative to the front of the counter. Attach reed_holder_leveler to stepper motor / frame with an M3 bolt, so that it sticks up from the rear of the counter. Add an additional M3 bolt to the front of the motor to secure it.
- Assuming that the wood frame also has a cut-out around the motor shaft such that it can lay flush against the wood, attach 2 4-40 bolts to a mounting hub (http://www.sparkfun.com/products/10006) so that they are sticking up vertically. Attach the hub to the shaft such that the back of the bolts is almost touching the motor surface.
- Install a 1/8' magnet (http://www.sparkfun.com/products/8644) in the face of each digit wheel. Orientation really matters for some reason, so experimentally figure out which orientation of the magnet trips the reed switch at the longest distance. Press-fit should work, but adding a bit of glue will ensure the magnets don't fall out.
- Print out the digit_wheel_label file, and cut out the labels. When you attach the labels, the '0' face should be directly opposite the face with the magnet embedded in it. I used scotch tape to attach them.
- Install the 'counter_gear_lowest.' The digit surface should be at the bottom, and it should fit snugly onto the mounting-hub/motor-shaft.
- Cut a 5/32' brass tube such that it can rest on top of the motor shaft and also reach the top of the reed-switch holder.
- Insert counter_gear_bottom into counter_gear_top. Rest it on top of counter_gear_lowest such that the middle holes are aligned. 20-tooth gear should be on the bottom.
- Rest counter_gear_highest on top such that the 20-tooth gear is on the bottom.
- Insert the brass tube you cut in step 8 so that it holds all 3 digit wheels in place, but they can all move independently of one another.
- Cut another short segment of 5/32' brass rod so that it fits in the whole length of the reed switch holder. Insert the two 8-tooth partial gears such that they rest on top of the 'digit' layer and sit between the gears. Insert the rod to hold them in place.
- Your counter should be complete! All three reed switches should trip when the counter reads '0-0-0,' and the circuit will complete.
(Redirected from Propellerhead Software)
Private[1] | |
Industry | Technology |
---|---|
Founded | 1994 |
Headquarters | Stockholm |
Area served | Digital audio production |
Products | Reason, ReCycle, Record, ReBirth RB-338, Figure |
Website | www.reasonstudios.com |
Logotype (1994—2019)
Reason Studios (formerly known as Propellerhead Software) is a music software company, based in Stockholm, Sweden, and founded in 1994.[1] It produces the studio emulation Reason.
- 1History
- 3Current products
History[edit]
Propellerhead Software was founded in 1994 by Ernst Nathorst-Böös, Marcus Zetterquist and Peter Jubel, who still hold prominent positions within the company.[1] Their first release was ReCycle, a sample loop editor that could change the tempo of a loop without affecting the pitch. The export medium was Propellerhead's own REX format. ReCycle was launched in conjunction with Steinberg, who marketed it as a companion to Cubase, as it brought a simple way of gaining control over tempo and timing of audio loops.[2]
In 1997, Propellerhead released ReBirth RB-338, a step based, programmable sequencer which emulated classic Roland instruments commonly associated with techno: TB-303 Bass Line Synthesizer and the TR-808 and TR-909 drum machines. It was hailed as an affordable alternative to buying old, unreliable hardware devices. Roland Corporation requested that an acknowledgment be added to the ReBirth packaging and splash screen; the unofficial endorsement became a marketing boost for Propellerhead, and they have retained a close relationship with Roland ever since.[3]
ReWire was developed jointly between Propellerhead and Steinberg for use with their Cubase sequencer. Released in 1998, it provided a virtual audio and synchronization connection between Cubase and ReBirth. In January 1999 the protocol was opened for general use by third parties without any license fee,[4] to allow communication between different sequencers.
Propellerhead soon focused their attention on their new product, the award winning[5]Reason, released in 2000. Reason was an entire studio emulation complete with virtual cables and representations of a subtractive synthesizer, sampler and drum machine, alongside a REX file loop player, a pattern step sequencer and a multitude of effects units. Making Reason's appeal even greater was the ability to create as many of each device as a computer could handle and a simple sequencer for notes and device automation. Additionally, Reason could run on average spec computers and was extremely competitively priced.[citation needed]
In May 2009, Propellerhead announced a new product, Record.[6] Designed for recording, arrangement and mixing, Record is made along the lines of Reason and continues the tradition of emulating hardware and the rack.
Record emulates a recording studio, with a mixing desk, a rack of virtual instruments and effects, and an audio sequencer (similar to traditional MIDI sequencing.) It is also made to work alongside Reason; if Record is installed on a computer with Reason on it, the modules from Reason will be usable inside of Record.[7]
Released 9 September 2009, Record has been praised for its stability, seamless integration with Reason, and sound quality,[8] and has received a number of awards, including Future Music's Platinum Award,[9] Computer Music Editor's Choice and Performance awards,[10] and the MusicTech Excellence award.[11]
In April 2010, Propellerhead released their first app for mobile platforms; a remake of their ReBirth RB-338 software for the Apple iPhone, iPod Touch and iPad. Developed together with Retronyms,[12] it's a 100% port of the original with added functionality for sharing song files with other iPhone users, zooming and panning.[13]
In July 2011, Propellerhead announced plans for Reason version 6 which includes all the features of Record 1.5. This allowed Propellerhead to discontinue Record and create two different versions of Reason.[14]
In March 2012, Propellerhead announced Rack Extensions and the Rack Extension store, a software architecture that will allow 3rd party developers to use their own instruments and effect devices inside of Reason. This technology was announced to appear alongside Reason 6.5 as a free update. Rack Extensions will be sold in an app store similar in a fashion in which Apple Inc. sells applications for the popular iOS platform. Hosted by Propellerhead Software, developers are free to use their own DSP and existing code to develop instruments and effects for use in Reason. When purchased, the Rack Extensions appear in Reason as a native Reason instrument or effect module and are privy to all of the features that Reason offers in its native instruments and effect devices.[15]
In April 2017, Propellerhead announced plans to support VST plugins in Reason, starting from version 9.5 [16]
Name[edit]
The name propellerhead comes from the pejorative term used to deprecate science fiction fans and other technophiles, who are stereotypically drawn wearing propeller beanies. The company is not related to the British big beatmusical ensemblePropellerheads.
On August 26, 2019, Propellerhead announced they would change their name to Reason Studios to have a name more closely tied to their core product: Reason.
Use of the Internet[edit]
From early on, Propellerhead used the Internet as both a marketing tool and as a method of ensuring they could communicate with their user base. An alpha version of ReBirth was made available for free download on the Propellerhead website in December 1996, and the company even searched the internet for active users of the TB-303 and sent them invitation emails to try the new software.[17]
The user forum has always been at the forefront of the Propellerhead community, with many employees checking them every day.[18] Allowing users to make requests and suggestions directly to the developers led to the first downloadable ReBirth update in 1997, and still today registered users of Propellerhead software can download updates and much additional content online. In November 2013, the forums were shut down indefinitely due to security concerns with the forum software. On 17 December they were resurrected with 4 new forum categories: Beginner, Advanced User, Rack Extensions and Post Your Music.[19]
On 16 January 2014 Propellerhead Software announced that they will close down the 15-year-old Reason community forums, shifting online customer interaction to their social media accounts instead.[20] The unofficial new forum, run by Reason users rather than by Propellerhead, is Reason Talk.[21] Though this is an independent forum, some Propellerhead employees have posted there and the forum hosted the official Reason beta test forum for Reason Version 9.
Current products[edit]
![Electromechanical 2.0 refill Electromechanical 2.0 refill](/uploads/1/2/6/3/126341804/192168778.jpg)
- Reason Essentials/Intro/Lite - an entry level version of Reason with fewer devices
- Reason Suite - the full Reason package plus all rack extensions form Reason Studios. Available since version 11.
- Reason Adapted - a cut down version of Reason distributed as part of various software bundles
- Figure - an iOS app that utilizes some technology from Reason's Thor synthesizer and Kong drum machine. It allows users to compose short loops by drawing figures on a touch screen device.
- Rebirth for iOS - an iOS app that brings almost all of the functionality of the desktop version of now discontinued ReBirth RB-338.[22]
- Reason Compact - an iOS app that combines some of the devices from Reason, most notably the Europa synthesizer
- Take - an iOS app for recording song ideas
- Thor - an iOS app version of the powerful synthesizer that was introduced in Reason 4
Rack Extensions[edit]
- A-List Acoustic Guitarist [23]
- A-list Classic Drummer [24]
- A-list Power Drummer [25]
- A-list Studio Drummer [26]
- Complex-1 modular synthesizer [27]
- Drum Sequencer [28]
- Fingerpicking Nylon A-list Acoustic Guitarist [29]
- Layers [30]
- Layers Wave Edition [31]
- Parsec [32]
- Polar [33]
- PolyStep Sequencer [34]
- Pop Chords A-list Electric Guitarist [35]
- Power Chords A-list Electric Guitarist [36]
- Processed Pianos [37]
- PX7 FM Synthesizer [38]
- Quad Note Generator [39]
- Radical Keys [40]
- Reason Drum Kits [41]
- Reason Electric Bass [42]
- Rotor [43]
- Scenic Hybrid Instrument
- Umpf Club Drums [44]
- Umpf Retro Beats [45]
Rack Extensions that are now included in Reason[edit]
- Audiomatic Retro Transformer [46] (included in Reason 9)
- Pulsar - Dual LFO [47] (included in Reason 9 [48])
- Radical Piano [49] (included in Reason since version 10 [50])
- Synchronous [51] (included in Reason since version 10 [52])
Technologies[edit]
- Remote - a communication protocol for use between control surfaces and software applications, first incorporated into Reason 3.
- Rack Extensions - a software platform that allows the use of instruments and effects developed by 3rd party companies for use inside of Reason.
![Electromechanical 2.0 Refill Electromechanical 2.0 Refill](/uploads/1/2/6/3/126341804/366281106.jpg)
Reason ReFills[edit]
ReFills compress sounds, settings and instrument configurations into single files, and are the only way of mass importing additional sounds into Reason.
- Reason Pianos
- Reason Drum Kits
- Reason Soul School
- Reason Electric Bass ReFill
- RDK Vintage Mono ReFill
- ElectroMechanical 2.0 ReFill
- Strings ReFill
- Abbey Road Keyboards - discontinued, developed with Abbey Road Studios[53]
Discontinued products[edit]
- ReBirth RB-338 - now reworked as an iOS app
- Record (incorporated into Reason as of version 6)
- Europa - a VST implementation of this synthesizer that was introduced in Reason 10. Discontinued with Reason 11 as Reason 11 can now be used as a plugin in other DAWs.
- ReWire - discontinued since Reason 11 as it can now be used as a plugin in other DAWs
External links[edit]
References[edit]
- ^ abcReason Studios. 2007. Quick Company Facts. Propellerhead Software - A Company on a Mission. Available online: [1] accessed 23 August 2007.
- ^Propellerhead Software. 2007. Interview Man of Reason. Available online: [2] accessed 21 January 2010.
- ^ReBirth Museum. 2005. The Roland Seal of Approval. The Debut. Available online: 'Archived copy'. Archived from the original on 22 April 2007. Retrieved 4 April 2015.CS1 maint: archived copy as title (link) accessed 23 August 2007.
- ^Walker, M. November 1999. ReWired for Sound. Sound on Sound. Volume 15, Issue 1. Available online: [3] accessed 23 August 2007.
- ^Musikmesse International Press Award. 2002. Software-Instruments. MIPA 2002 - Winner. Available online: 'Archived copy'. Archived from the original on 28 September 2007. Retrieved 23 August 2007.CS1 maint: archived copy as title (link). Accessed 23 August 2007.
- ^http://www.soundonsound.com/news?NewsID=11529
- ^'Archived copy'. Archived from the original on 17 July 2011. Retrieved 14 January 2010.CS1 maint: archived copy as title (link)
- ^'Archived copy'. Archived from the original on 17 July 2011. Retrieved 15 January 2010.CS1 maint: archived copy as title (link)
- ^http://record-you-uk.blogspot.com/2009/08/record-reviewed-in-future-music.html
- ^http://record-you-uk.blogspot.com/2009/08/computer-music-front-cover-and-editor.html
- ^http://record-you-uk.blogspot.com/2009/08/musictech-magazine-give-propellerhead.html
- ^http://news.cnet.com/8301-13526_3-20004046-27.html?tag=hotTopicsBody.1
- ^http://createdigitalmusic.com/2010/05/01/rebirth-reborn-as-synths-in-your-hand-qa-with-ernst-nathorst-boos/#more-10827
- ^http://www.propellerheads.se/products/reason/
- ^https://www.propellerheads.se/press/121-propellerhead-unveils-rack-extension-technology-for-reason
- ^https://www.propellerheads.se/reason-95
- ^ReBirth Museum. 2005. ReBirth for the Masses. The Birth of ReBirth. Available online:'Archived copy'. Archived from the original on 15 August 2007. Retrieved 23 August 2007.CS1 maint: archived copy as title (link) accessed 23 August 2007.
- ^Johnson, D. October 2005. Beta-testing Reason. Sound on Sound. Volume 20, Issue 12. Available online: [4] accessed 23 August 2007.
- ^http://www.propellerheads.se/forum-info/
- ^https://propellerheads.se/forum/
- ^http://www.reasontalk.com/
- ^http://rebirthapp.com/
- ^https://www.propellerheads.com/en/reason/rack-extensions/acoustic-guitarist
- ^https://www.propellerheads.com/en/reason/rack-extensions/classic-drummer
- ^https://www.propellerheads.com/en/reason/rack-extensions/power-drummer
- ^https://www.propellerheads.com/en/reason/rack-extensions/studio-drummer
- ^https://www.propellerheads.com/en/reason/rack-extensions/complex-1
- ^https://www.propellerheads.com/en/reason/rack-extensions/drum-sequencer
- ^https://www.propellerheads.com/en/reason/rack-extensions/fingerpicking-nylon
- ^https://www.propellerheads.com/en/reason/rack-extensions/layers
- ^https://www.propellerheads.com/en/reason/rack-extensions/layers-wave-edition
- ^https://www.propellerheads.com/en/reason/instruments/parsec
- ^https://www.propellerheads.com/en/reason/rack-extensions/polar
- ^https://www.propellerheads.com/en/reason/rack-extensions/polystep-sequencer
- ^https://www.propellerheads.com/en/reason/rack-extensions/pop-chords
- ^https://www.propellerheads.com/en/reason/rack-extensions/electric-guitarist
- ^https://www.propellerheads.com/shop/rack-extension/processed-pianos/
- ^https://www.propellerheads.com/en/reason/rack-extensions/px7
- ^https://www.propellerheads.com/en/reason/rack-extensions/quad-note-generator
- ^https://www.propellerheads.com/en/reason/rack-extensions/radical-keys
- ^https://www.propellerheads.com/en/reason/rack-extensions/reason-drum-kits
- ^https://www.propellerheads.com/en/reason/rack-extensions/reason-electric-bass
- ^https://www.propellerheads.com/en/reason/rack-extensions/rotor
- ^https://www.propellerheads.com/en/reason/rack-extensions/umpf-club-drums
- ^https://www.propellerheads.com/en/reason/rack-extensions/umpf-retro-beats
- ^https://www.propellerheads.se/reason/effects/audiomatic/
- ^https://www.propellerheads.se/reason/rack-extensions/pulsar
- ^https://www.propellerheads.se/press/260-propellerhead-releases-reason-9-music-production-software
- ^https://www.propellerheads.com/en/reason/instruments/radical-piano
- ^https://www.propellerheads.com/press/270-propellerhead-releases-reason-10-music-production-software
- ^https://www.propellerheads.com/en/reason/effects/synchronous
- ^https://www.propellerheads.com/press/270-propellerhead-releases-reason-10-music-production-software
- ^Abbey Road Studios. June 2007. Abbey Road and Propellerhead Software announce 'Abbey Road Keyboards' for Reason. Abbey Road News. Available online: [5] accessed 23 August 2007.
Retrieved from 'https://en.wikipedia.org/w/index.php?title=Reason_Studios&oldid=936755513'